The compressive strength of concrete built with river sand and quarry dust as fine aggregate was examined in this study. Ordinary Portland cement (OPC) was blended with river sand and quarry dust at five levels, namely 10%, 20%, 30%, 40%, and 50%, by partially substituting OPC with river sand and quarry dust.

Quarry Dust: The quarry dust was procured from quarry plant in Mambakkam, Chennai. The cement used was 53 grade Ordinary Portland cement (OPC). Water used was simple tap water and the calculations of the mix design was as per IS 10262-2009. Oxides Percentage Content Calcium Oxide(CaO) 60%-67% Silicon dioxide(SiO2) 17%-25%

Quarry dust Specific gravity : 2.57 Fineness modulus : 2.41 Density : 1.85gm/cc Void ratio : 0.42 Ordinary Portland cement Specific gravity : 3.05 Initial setting time : 30 min. Final setting time : 220 min Fineness : 8 % residue on IS 90 micron sieve Water P

2.1 Cement: The Cement used in this project is Ordinary Portland Cement of 53 grade confirming to IS 12269 – 1987.The physical properties of cement are categorized as per IS 456-2000. TABLE I PHYSICAL PROPERTIES OF CEMENT S.No Properties Value Permissible limit as per IS: 12269-1987 1 Specific Gravity 3.11 Varies from 3.1 to 3.15

Cement is a binding material used in the preparation of concrete. It binds in the coarse aggregate and fine aggregate with the help of water to a monolithic matter. And also, it fills the voids in the fine and coarse aggregate. Table2.1 Physical properties of cement Types of cement used: Ordinary Portland Cement Sl no Property values

1. 53 grade Ordinary Portland Cement (OPC) 2. Quarry dust 3. ing agent 4. Potable water The properties of the materials are presented in following sections. 4.2.1 Cement Portland cement grade 53 is used in this test. It is the basic ingredient of concrete, mortar and plaster. Cement is an amorphous (glassy) powdered siliceous material

Concrete quarry dust blocks (CQDB) are manufactured from a mixture of cement: sand: quarry dust. A descriptive study using structured questionnaires and Laboratory test procedures was conducted to ...

Details of Silica Fume A. Materials used in this experiment Code 920-D 1) Cement Densified (Non- In this experimental study, Ordinary Portland Type Combustible) Cement conforming to IS: 8112-1989 was used.

M30 grade of cement concrete. Keywords: geo-polymer, fly ash, quarry dust, alkaline activators, ambient curing. 1. INTRODUCTION Several research and investigations are in progress to reduce the use of Portland cement in normal strength concrete. Because the use of ordinary Portland cement in the construction industry is the major suppliers of ...

(c) The compressive strength results of quarry dust concrete (cubes) were obtained in the third series, where M20, M25, and M30 grades of concrete with 20, 25, and 30 percent replacement of quarry dust and also workability are studied by varying the water-cement ratio of 0.45 and 0.50 and the results are presented.

Here M20 mix of concrete of ratio 1:1.5:3 (Cement: Fine aggregate +Quarry dust: Coarse Aggregate +Recycled aggregate) and water cement ratio of 0.40 is used for preparing test samples by replacing fine and coarse aggregate with quarry dust and recycled aggregate in percentages varying from 0%, 10%, 20%, 30%,

The numerous demanding application of concrete is not readily met with Ordinary Portland Cement (OPC) alone. To meet up the demand and as well as ensured the green concrete durability, it has becomes necessary to incorporate mineral additions with the best combination of others by-product as replacement to improve the performance without jeopardizing the strength of the concrete.

Quarry dust fine powder as substitute for ordinary portland cement in concrete mix. ... the utilization of Quarry Dust (QD) can be used to replace sand in SCC which also can reduce the greenhous ...

compressive strength of quarry dust concrete can be improved with admixture and also super plasticizers can be used to improve the workability of quarry dust replaced concrete 2, MATERIAL USED AND THEIR PROPERTIES 2.1 Materials used Ordinary Portland Cement (43 Grade) conforming to IS: 8112-1989 was used for the

1.2 Properties of Quarry dust: Table 1.2 Properties of Quarry dust Organic material content Nil Compatibility with cement Use any type of Portland cement and blended cements for various mix designs Setting time Normal as preformed by river sand Workability Good Yield Rich mix Standard mix design for M20 grade concrete per Cum.

The innovative use of Quarry Dust in concrete formulations as a fine aggregate replacement in the range of 0%, 15%, 30% & 45% by weight for M-40 grade cement (PPC). Fly ash is also used as partial replacement of cement in ... Ordinary Portland Cement of 53 grade with specific gravity of 3.15 was used in the present experimental study conforming ...

MATERIALS USED : Cement. Ordinary Portland cement available in the local market of standard brand of 53 grade confirming to IS 12269 – 1987 was used for the concrete mix. The cement should be fresh and of uniform consistency and there is no …

Concrete grade considered for this experimental study is M30 with 53 grade of Ordinary Portland Cement. About 50% and 75% cement was replaced by fly ash. Sand is replaced by the 5% of coir pith and 25%, 50% and 75% of quarry dust.

Ordinary Portland Cement (53 Grade) with 26 percent normal consistency Conforming to IS: 8112-1989 [3] was used in our project. Portland pozzolana cement- An intimately inter ground mixture of Portland clinker and pozzolana with the possible addition of gypsum ( natural or chemical ) or an intimate and uniform blending of Portland cement and ...

produced concrete using the rock dust as an alternative to natural sand. They studied the effect of rock dust on the strength and workability of concrete. 3.0 MATERIALS 3.1 Cement The Ordinary Portland cement was used in this study conforming to IS: 8112-1989. The specific gravity of cement is 3.15.

percentages as 5%, 10%, 15% and 20% in concrete containing quarry dust as a complete substitute for fine aggregate and to determine the optimal percentage of metakaolin to obtain maximum strength and durability properties. II. E. XPERIMENTAL . P. ROCEDURE. A. Materials Used . Ordinary Portland Cement (43 Grade) was used

The numerous demanding application of concrete is not readily met with Ordinary Portland Cement (OPC) alone. ... (2011) have reported that strength o f quarry dust concrete was comparably 10-12% ...

Ordinary Portland Cement (OPC) of 53 Grade conforming to IS 12269 and Fly ash conforming to IS 3812 (Part 1) are used during investigations. Three cementitious content per cubic meter of concrete considered were 400kg, 450kg and 500kg. In the first set of trials, the cement replacement was done with fly ash at 0%, 20%, 35% and 50% of total ...

In this paper, the replacement of cement by Micro Fine Quarry Dust (MFQD)- a white material produced by-product from the quarry, in concrete mixture seen to be a reliable source in terms of strength and rate of water absorption. There were five (5) percentages of cement …

permeability of Quarry Dust concrete is less compared to conventional concrete. Nagaraj and Zahinda Banu (1996) produced concrete using the rock dust as an alternative to natural sand. They studied the effect of rock dust on the strength and workability of concrete. 3.0 MATERIALS 3.1 Cement The Ordinary Portland cement was used in this ...

Quarry Dust Fine Powder as Substitute for Ordinary Portland Cement in Concrete Mix 193 Journal of Engineering Science and Technology April 2014, Vol. 9(2) enhances compressive strength at hardened state [3]. However, there is still limited information on the behaviour of concrete properties with the inclusion of different

Experimental program A combination of GGBFS and low calcium Fly ash is used as binder instead of ordinary Portland cement in the preparation of cement mortar and the sand which is generally used in preparing mortar is replaced by quarry rock dust.

concrete. Quarry dust has been used for di erent activities ... of quarry dust with water-cement ratio of . are studied and the results are presented. (e) In the h series, M grade of concrete with ... sand with M grade by using ordinary Portland cement (OPC). With the increase in age of concrete…

Workability and water absorption Studies were done for concrete with Quarry Rock Dust and compared with the Conventional Concrete . November 2016, Volume 3, Issue 11 JETIR (ISSN-2349-5162) ... CEMENT The Ordinary Portland Cement (OPC) 53 grade used in the project work. This is used as main binder in the mixes.

Quarry Dust Fine Powder as Substitute for Ordinary Portland Cement in Concrete Mix 193 Journal of ... to operate as quarries and supply quarry dust to use as an ... Read more quarry dust used replacement of cement in 2013

benefit to concrete. Quarry dust is used to increase the strength of concrete over concrete made with equal quantities of sand. Quarry dust has been used for different activities in the construction industry such as in road ... Khyber ordinary Portland cement of 43 grade confining to IS 8112 [8] was used throughout the work.

This research work was experimentally carried out to investigate comparing the effects of Rice Husk Ash (RHA) and Quarry Dust on the compressive strength of concrete using local aggregates as super pozzolans at optimum replacement percentage which

Materials. In the experimental study, ordinary Portland cement complying with BIS:8112 [] was used along with locally available natural river sand and coarse aggregate.A dolomite quarry waste used to replace the natural sand was obtained from a local processing unit located at Rajsamand, India.

Kartini K, Hamidah M S, Norhana A R and Nur Hanani A R 2014 Quarry Dust Fine Powder As Substitute For Ordinary Portland Cement In Concrete Mix Journal of Engineering Science and Technology 9 191-205. Google Scholar. Srivastava M, Srivastava H, Singh N K and Awasthi A 2017 Behaviour of Concrete on the Use of Quarry Dust and Superplasticizer to ...

compressive strength of quarry dust concrete can be improved with admixture and also super plasticizers can be used to improve the workability of quarry dust replaced concrete 2, MATERIAL USED AND THEIR PROPERTIES 2.1 Materials used Ordinary Portland Cement (43 Grade) conforming to IS: 8112-1989 was used for the